Attention Microsoft Windows XP users:
NOTE: When uninstalling the scanner driver or One Touch, please leave the scanner's USB cable plugged into the computer. Unplug the USB cable from the computer after the software uninstall program closes.
Q: What other installation screens am I seeing during the scanner driver installation?
A: In addition to the scanner driver and the OneTouch software being installed, you will also install the OneTouch 4.0 ScanSoft OmniPage OCR module and the Visioneer OneTouch with Kofax VRS Technology module.
Q: Why won't my scanner buttons work after scanning with Windows Image Acquisition (WIA)?
A: After performing a scan using the WIA interface you must close the application you were using before scanning with the buttons on the scanner. This does not occur when scanning using the TWAIN interface.
Q: Why does my scanner not function after performing a system restore on Windows XP or Windows Vista?
A: The system restore process may have corrupted some of the driver components. It is recommended that you reinstall your scanner driver. Please refer to the instructions in your scanner User's Guide Maintenance section for instructions on reinstalling your scanner driver.
Q: I tried to 'Repair' the One Touch 4.0 application by using the 'Change' function through the Add/Remove Program within the Control Panel and was not able to repair it. How do I repair One Touch 4.0?
A: Before attempting to repair One Touch 4.0, unplug the USB cable connected to the scanner.
Q: OneTouch 4.0 no longer functions after installing Internet Explorer 7 on Windows XP. How do I resolve this issue?
A: This is a known issue where OneTouch 4.0 stops responding when Internet Explorer 7 is installed after the scanner. To resolve the issue:
Q: I am getting an error message that OCR fails every time I try to scan using the OCR features from OneTouch 4.0. What is the problem?
A: Anti-SpyWare software that is set to always run may interfere with the driver functionality. It is recommended that you temporarily disable or suspend the automatic protection feature during scanning. After scanning is complete and your file has been saved, turn the auto-protect feature back on. You do not need to close the Anti-SpyWare software.
Q: What recommendations do you have for using PaperPort?
A: PaperPort is a document management software application. The PaperPort scanning features allows you to insert new pages into an existing file and name your file immediately after scanning. From within the PaperPort desktop you can sort your documents and move them between folders as you would through the Windows My Documents folder. You can reorder the pages in a PDF file, unstack a document so all the pages are resaved as individual files. PaperPort also has some basic image editing options in the PaperPort PageView, such as; adding notes to image files, modifying image colors, and touch up the image using the erase and/or auto-correct options.
Q: After rebooting my computer, the DVD front end is automatically displayed, but when I try to install the scanner driver, I get an error message which reads:
This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to confirm that this is a valid Windows Installer package.
What do I do?
A: Exit out of the installer by pressing the "MAIN MENU" link, then the "EXIT" link. Eject the DVD from your DVD-ROM drive, then put it back in again; once the installer has restarted, proceed normally.
Xerox scanners are sensitive electronic devices. Static electricity
can damage the components inside the scanner if precautions are not
taken. Do not touch the HOST terminal on the back of the scanner
with your finger or any other object while the power is on.
Xerox scanners are sensitive electronic devices. Static electricity can damage the components inside the scanner if precautions are not taken. Do not touch the HOST terminal on the back of the scanner with your finger or any other object while the power is on.